There are 19 products.

Showing 1-12 of 19 item(s)

Reference: KNOBS+ADAPTER

Threaded KNOBS set

Review(s): 0

Threaded knobs for older versions of SHH SHIFTER (NEWT2, NEWT, HAWK, 7R and 7R MAX) Includes the long "sequential" type knob, the short "H gearbox" type knob. You can also include the thread adapter (converts the 8mm rod into an M18x1.5 thread) or purchase only this adapter if you are going to use your commercial knob. NOTE: IF YOU PURCHASE A THORN...

Price €10.00 Regular price €12.10
More
24abr

Reference: BLT-6R-POL

THORN

Review(s): 15

THORN THORN is the new SHH Shifter. Sixth evolution and fully renovated. A completely new shifter in the mechanical part (no need for sequential plate anymore!), shorter travel in SEQ mode, new electronics and new types of H plates available. 1) Choose the color of the shifter 2) The mount you need (help here) 3) Type of the top plate

Reference: POL BL

STANDARD COCKPITS EXTRA MOUNT

Review(s): 0

Mount for cockpits ready for "Logitech" and/or "Thrusmaster" shifters. You can use this mount on all cockpits on the market where "Logitech G25/G27/G29" and/or "Thrusmaster TH8A y TH8RS" shifters are compatible. This bracket allows the shifter to be raised or lowered +/- 50mm. DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...

Price €10.00 Regular price €12.10
More
24abr

Reference: SIDE BL

SIDE mount

Review(s): 1

This piece allows any other mount to be screwed laterally at 90º (left or right) or directly on a profiled tube with 2 slots for M8 screws. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS.

Price €14.00 Regular price €16.94
More
24abr

Reference: SQ CB

SEQUENTIAL PLATE (OLD VERSIONS)

Review(s): 0

Sequential top plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS...

Price €11.00 Regular price €13.31
More
24abr

Reference: Lplate

L shaped Plate

Review(s): 0

L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....

Price €3.00 Regular price €3.63
More
24abr

Reference: customtext

CUSTOM TEXT

Review(s): 0

Custom text NOTE: MANY OF THE IMAGES WITH CUSTOM TEXTS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF REQUESTED CUSTOM TEXTS BY CUSTOMERS PREVIOUSLY

Price €6.00 Regular price €7.26
More
24abr

Reference: customlogo

CUSTOM LOGO

Review(s): 0

Custom logo NOTE: MANY OF THE IMAGES WITH CUSTOM LOGOS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF LOGOS REQUESTED BY CUSTOMERS PREVIOUSLY

Price €10.00 Regular price €12.10
More
24abr

Reference: BOT BL

BOTTOM Extra Mount for THORN shifters

Review(s): 0

ONLY COMPATIBLE WITH THORN, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...

Price €12.00 Regular price €14.52
More
24abr

Reference: BOT-OLD-BL

BOTTOM Extra Mount for NEWT2 shifters

Review(s): 0

ONLY COMPATIBLE WITH NEWT2, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...

Price €12.00 Regular price €14.52
More
24abr

Follow us on Facebook