Reference: BLN-RD-TAB

NEWT BLACK

Review(s): 3

NEWT is the latest in SHH Shifter. Fourth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear.  Now choose the...

Reference: SQ GR

SEQUENTIAL PLATE

Review(s): 0

Sequential plate colored with adhesive vinyl, except RAW plate, which must be decorated. The plate is separated into two halves that facilitates rapid change.

Price €11.00
More
24abr

Reference: Lplate

L shaped Plate

Review(s): 0

L shaped Plate NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

Price €3.00
More
24abr

Reference: RDN-CB-TAB

NEWT RED

Review(s): 0

NEWT is the latest in SHH Shifter. Fourth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear.  Now choose the...

All best sellers
  • Banner

Description

The PC shifter (PC only) has H / SEQ modes and includes the chosen mount.

The shifter includes:

-Selected mount option

-Top plate "7 + R" or "6 + R"

-Threaded long knob "Sequential" type

-Threaded short knob "H-pattern" type

-Adapter for commercial knobs*

-USB cable lenght 180 cm. It can be replaced by any type B USB cable on the market up to 3m.

The RAW top plate has a very slightly rough finish. It may be perfectly valid without vinyl, but it has not a bright or a perfectly pulished surface.

You can customize the shifter with many options here.

NOTE: The shifter has both H and Sequential modes without the need of the SEQ plate, it is optional.

* Valid for knobs with thread M17x1.5

You must select the necessary mounting option according to your needs. These are the options:

TABLE: mount for tables or similar without holes. Maximum thickness 55mm (2.2in). This mount CANNOT be used on thicker tables.

G25/27/29: support for cockpits that include holes for "Logitech G25 / G27 / G29" shifters.

TH8: support for cockpits that include holes for "Thrusmaster TH8A and TH8RS" shifters.

L PLATE: L PLATE for anchoring screwed into custom cockpits or profiled aluminum cockpits.

ZALEM: Ready for "Zalem" cockpits or clones. Includes a 25x25 square tube, entering in a 30x30 tube.

FANATEC: Ready for some older Fanatec steering wheels, with two 13mm bars (not included).

SQ V1.5: Ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter. M6x20 screws included. (THIS SHIFTER VERSION DOES NOT ALLOW ANY OTHER MOUNT)

BOTTOM MOUNT: Ready for a bottom mounting. It has two holes for M8 bolts front and behind for anchoring into custom cockpits or profiled aluminum cockpits. Screws not included. (THIS SHIFTER VERSION DOES NOT ALLOW ANY OTHER MOUNT)

Product Details
BLN-CB-TAB
Reviews
Grade 

SHH Shifter

Arrived a day early. The shifter is pure quality for the price. Beautifully made! I can see why you are so busy! Epic product!

Grade 

Black Newt with TM Mount Review.

I love almost everything about the Newt. It just works. It feels great in both H shift and SEQ mode. The two included knobs feel very nice in the hand. It comes ready to give a great experience. The mount fits it really snug to my frame, and it does not move much at all, I am almost 100% surethe slight flex I get during hard shifts is from my frame, not the Newt. The only downside is the USB cable exist the shifter via the right hand side, and the USB cable has a rather long header. If I mount the Shifter on the left hand side like I am used too, the cable fouls on the leg and I am concerned it might damage the USB header on the PCB board with hours of use. So I mounted the Shifter on the right, and now I drive that way. I think a good fix would be to exit the USB from the back or front of the unit. You could alternately build up the case material thicker around the cable exit so if it is close to the drivers leg, it does not press on the cable end. I purchased a 90degree USB cable but the case does not allow installation of this plug and I dont want to modify it. Otherwise, it is perfect and the cost is amazing. I recommend this for someone who wants an upgrade from some of the entry level sim gear (G920 shifter in my case) but does not have a lot of money and still wants a great experience. My only regret is not purchasing the Sequential plate when I purchased the 7r plate. 9.5/10 (if cable let me mount it on the left, easy 10/10)

Grade 

Lovely shifter, even better customer service!

Got the shifter back in 2019. Now, 2,5 years later (and out of warranty) I asked for help on greasing the shifter a bit (works great, was just squeaking a bit) and about a spring replacement (just cause I feel it got a tiny bit worn after all this use, nothing major tbh). Support answered in 10 minutes on a SUNDAY AFTERNOON (Europe) and we traded some emails. Problem was fixed and they will add 2 springs for me on the order I am about to make for a friend. Lovely team and the shifter a lot better than the TH8A I tried back in the day.

Write your review

NEWT RED

NEWT BLACK

NEWT is the latest in SHH Shifter. Fourth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. 

Now choose the color of the shifter, the mount you need and the color and type of the top plate.

SHIFTER COLOUR

black.jpg  red.jpg  white.jpg  grey.jpg

Write your review

NEWT BLACK

BLN-CB-TAB
Rating 

NEWT is the latest in SHH Shifter. Fourth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. 

Now choose the color of the shifter, the mount you need and the color and type of the top plate.

SHIFTER COLOUR

black.jpg  red.jpg  white.jpg  grey.jpg

Mount
Top Plate
€98.00
Quantity

:

The estimated shipping day is January 15th (for complete shifters)

 

The shipping will be made after the manufacture. This process takes 2 to 7 working days depending on the day of the week the order is placed (except when there is a warning and delivery date announced on the front page of the website)

 

SHH Shifter has a 2 year full warranty, except bad handling. The first 6 months dispatch and return will be at our expense, afterwards the customer will be required to pay delivery charges (not the return).

You might also like

Reference: SQ GR

SEQUENTIAL PLATE

Review(s): 0

Sequential plate colored with adhesive vinyl, except RAW plate, which must be decorated. The plate is separated into two halves that facilitates rapid change.

Price €11.00
More
24abr
2 other products in the same category:

Follow us on Facebook