Reference: BLN-CB-POL

NEWT2 BLACK

Review(s): 9

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now: 1) Choose the color...

Reference: SQ CB

SEQUENTIAL PLATE

Review(s): 0

Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS JUST A HELP TO PERFECTLY DELIMIT THE MOVEMENT OF THE ROD

Price €11.00
More
24abr

Reference: Lplate

L shaped Plate

Review(s): 0

L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....

Price €3.00
More
24abr

Reference: RDN-CB-POL

NEWT2 RED

Review(s): 1

NEWT is the latest in SHH Shifter. Fourth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now: 1) Choose...

All best sellers
  • Banner

Description

The PC shifter (PC only) has H / SEQ modes and includes the chosen mount.

The shifter includes:

-Selected mount option SUGGESTIONS

-Top plate "7 + R" or "6 + R"

-Threaded long knob "Sequential" type

-Threaded short knob "H-pattern" type

-Adapter for commercial knobs*

-USB cable lenght 180 cm. It can be replaced by any type B USB cable on the market up to 5m.

-2mm - 2.5mm - 3mm Allen keys for various configuration and/or mounting changes.

The RAW top plate has a very slightly rough finish. It may be perfectly valid without vinyl, but it has not a bright or a perfectly pulished surface.

You can customize the shifter with many options here.

NOTE: The shifter has both H and Sequential modes without the need of the SEQ plate, it is optional.

* Valid for knobs with thread M17x1.5

You must select the necessary mounting option according to your needs. These are the options:

STANDARD COCKPITS: mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrusmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm.

TABLE: mount for tables or similar without holes. Maximum thickness 55mm (2.2in). This mount CANNOT be used on thicker tables. This mount allows the shifter to be raised or lowered by 25mm.

BOTTOM MOUNT: Ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not included). This mount is bolted to the shifter and only the NEWT2 version is compatible.

LATERAL MOUNT (IMAGES IN PROCESS): ready for a lateral mounting, both in a cockpit with a profiled tube, and in a cockpit made by hand. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS. It also allows you to add one of our mounts at 90º (second mount not included). If you have any doubt ask us here.

L PLATE / CUSTOM COCKPITS: this plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with profiled tube. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible. This mount allows the shifter to be raised or lowered +/- 50mm but it does not allow lateral mounting. Consult doubts.

"ZALEM": Ready for "Zalem" cockpits or clones. Includes a 25x25 square tube, entering in a 30x30 tube.

"FANATEC OLD": Ready for some older Fanatec steering wheels, with two 13mm bars (not included).

LOOK AT THIS IF YOU NEED ONLY THE SHIFTER'S BODY

Product Details
BLN-BL-POL
Reviews
Grade 

Good customer service

Had an issue with my shifter, quickly resolved within 1 week free of charge. Quick and detailed messages, making my life easy. The shifter itself is solid and the best shifter I've used when comparing to the TH8A and G27 shifter.

Grade 

Excelente producto

El tacto del cambio es espectacular y la calidad es impresionante, después de muchas horas de uso te das cuenta de que está hecho para durar. La calidad de impresión de la carcasa es excelente, no se marcan las líneas típicas de la impresión en 3D, se nota mucho que cuidan el proceso de fabricación. Sin pensarlo dos veces, recomendaría comprar este producto antes que el equivalente a otras marcas comerciales.

Grade 

Lovely shifter

Arrived 2 days early. And the shifter is amazing quality for the price. And looks and feeling are fantastic! I can see why you are busy!

Grade 

SO TACTILE... LOVE IT

went to this from a logitech G29/g920 shifter its day and night diffrence in feel! 5 stars!

Grade 

a good choice

nice realistic shifter the gear lock feeling is perfect. Immersion is raised up, I am very satisfied .
plate 7+R gives some imprecision into 5/7 gear selection , but really few car into 7 gears manual stick, so 6+R seems best choice. a shorter stick could also be an option ?

Grade 

Amazing

Incredible quality for the price.

Grade 

SHH Shifter

Arrived a day early. The shifter is pure quality for the price. Beautifully made! I can see why you are so busy! Epic product!

Grade 

Black Newt with TM Mount Review.

I love almost everything about the Newt. It just works. It feels great in both H shift and SEQ mode. The two included knobs feel very nice in the hand. It comes ready to give a great experience. The mount fits it really snug to my frame, and it does not move much at all, I am almost 100% surethe slight flex I get during hard shifts is from my frame, not the Newt. The only downside is the USB cable exist the shifter via the right hand side, and the USB cable has a rather long header. If I mount the Shifter on the left hand side like I am used too, the cable fouls on the leg and I am concerned it might damage the USB header on the PCB board with hours of use. So I mounted the Shifter on the right, and now I drive that way. I think a good fix would be to exit the USB from the back or front of the unit. You could alternately build up the case material thicker around the cable exit so if it is close to the drivers leg, it does not press on the cable end. I purchased a 90degree USB cable but the case does not allow installation of this plug and I dont want to modify it. Otherwise, it is perfect and the cost is amazing. I recommend this for someone who wants an upgrade from some of the entry level sim gear (G920 shifter in my case) but does not have a lot of money and still wants a great experience. My only regret is not purchasing the Sequential plate when I purchased the 7r plate. 9.5/10 (if cable let me mount it on the left, easy 10/10)

Grade 

Lovely shifter, even better customer service!

Got the shifter back in 2019. Now, 2,5 years later (and out of warranty) I asked for help on greasing the shifter a bit (works great, was just squeaking a bit) and about a spring replacement (just cause I feel it got a tiny bit worn after all this use, nothing major tbh). Support answered in 10 minutes on a SUNDAY AFTERNOON (Europe) and we traded some emails. Problem was fixed and they will add 2 springs for me on the order I am about to make for a friend. Lovely team and the shifter a lot better than the TH8A I tried back in the day.

Write your review

NEWT2 RED

NEWT2 BLACK

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now:

1) Choose the color of the shifter

2) The mount you need (help here)

3) The color and type of the top plate

SHIFTER COLOUR

black.jpg  red.jpg  white.jpg  grey.jpg

Write your review

NEWT2 BLACK

BLN-BL-POL
Rating 

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now:

1) Choose the color of the shifter

2) The mount you need (help here)

3) The color and type of the top plate

SHIFTER COLOUR

black.jpg  red.jpg  white.jpg  grey.jpg

Mount SUGGESTIONS
Top Plate
€99.00
Quantity

100% secure payments
 

The shipping will be made after the manufacture. This process takes 2 to 7 working days depending on the day of the week the order is placed (except when there is a warning and delivery date announced on the front page of the website)

 

SHH Shifter has a 2 year full warranty, except bad handling. The first 6 months dispatch and return will be at our expense, afterwards the customer will be required to pay delivery charges (not the return).

You might also like

Reference: SQ CB

SEQUENTIAL PLATE

Review(s): 0

Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS JUST A HELP TO PERFECTLY DELIMIT THE MOVEMENT OF THE ROD

Price €11.00
More
24abr
2 other products in the same category:

Follow us on Facebook