Juego POMOS roscados

Reference: BOT bl

BOTTOM Extra Mount

ONLY COMPATIBLE WITH NEWT2, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...

Reference: customtext

CUSTOM TEXT

Custom text

Reference: Lplate

L shaped Plate

L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....

Reference: BLN-CB6-POL

NEWT2 BLACK

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now: 1) Choose the color...

Reference: TAB bl

Table Extra Mount

Mount for tables between 0 to 55mm (2.2in). DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

Reference: ZAL bl

Zalem Extra Mount

Mount for Zalem cockpits NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

Reference: CB7e

7R PLATE

7 + R Plate

More customizations

Reference: POL BL

STANDARD COCKPITS EXTRA MOUNT

Mount for cockpits ready for "Logitech" and/or "Thrusmaster" shifters. You can use this mount on all cockpits on the market where "Logitech G25/G27/G29" and/or "Thrusmaster TH8A y TH8RS" shifters are compatible. This bracket allows the shifter to be raised or lowered +/- 50mm. DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...

Reference: CB6e

6R PLATE

6 + R Plate

Reference: FAN bl

"Old Fanatec" Extra Mount

Mount for old Fanatec steering wheels or cockpits ready for old Fanatec shifters with 13 mm bars. Compatible with the old Fanatec "CSR Elite Wheel" and "Porsche 911 Wheel" or the "CSR / Porsche Wheel Shifter Set Adapter". NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

Reference: SIDE RD

SIDE mount

This piece allows any other mount to be screwed laterally at 90º (left or right) or directly on a profiled tube with 2 slots for M8 screws. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS.

Reference: WHN-CB6-POL

NEWT2 WHITE

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now: 1) Choose the color...

Reference: RDN-CB6-POL

NEWT2 RED

NEWT2 has many improvements. Fifth evolution and better than ever. Electronics 100% updated, now with USB-B connector and modular, total change of the outer casing, now with a much better design, more shifter parts CNC machined and a better 7R top plate that reduces the possibility of a bad shifting when entering the 5th gear. Now: 1) Choose the color...

Reference: SQ CB

SEQUENTIAL PLATE

Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS JUST A HELP TO PERFECTLY DELIMIT THE MOVEMENT OF THE ROD

Reference: customlogo

CUSTOM LOGO

Custom logo