US BUYERS: According to the latest news, the 10% tariff will not be applied for purchases under $800 USD for the time being. We will continue to monitor this change and will update you as soon as there is any further information.
COG-SHH-3DOF MOTION SYSTEM
COG-SHH-3DOF MOTION SYSTEM
SECURE PAYMENT
There are 22 products.
Reference: BLT-6R-POL
THORN is the new SHH Shifter. Sixth evolution and fully renovated. A completely new shifter in the mechanical part (no need for sequential plate anymore!), shorter travel in SEQ mode, new electronics and new types of H plates available. 1) Choose the color of the shifter 2) The mount you need (help here) 3) Type of the top plate
Reference: BOT BL
ONLY COMPATIBLE WITH THORN, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...
Reference: POL BL
Mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrustmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm. NOTE: This mount does not include any kind of clamp, it requires holes in your cockpit's shifter base. DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...
Reference: Lplate
L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures. It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....
Reference: KNOBS+ADAPTER
Threaded knobs for older versions of SHH SHIFTER (NEWT2, NEWT, HAWK, 7R and 7R MAX) Includes the long "sequential" type knob, the short "H gearbox" type knob. You can also include the thread adapter (converts the 8mm rod into an M18x1.5 thread) or purchase only this adapter if you are going to use your commercial knob. NOTE: IF YOU PURCHASE A THORN...
Reference: CB6
6 + R Plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL
Reference: SQ CB
Sequential top plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS...
Reference: CB7
7 + R Plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL
