SHIFTER ACCESSORIES
SHIFTER ACCESSORIES

SHIFTER ACCESSORIES

All shifters include:

  • H and SEQ modes with a simple twist of the wrist.

  • Mount of the chosen version

  • Available top plates: 7R, 6R, 5R and 7R type2

  • Long knob "Sequential" style

  • Short knob "H-pattern" style

  • USB cable lenght 180 cm (can be replaced by a longer one of up to 5m)

More detailed features here

Active filters
SEQUENTIAL PLATE (OLD VERSIONS) Quick view

Reference: SQ CB

SEQUENTIAL PLATE (OLD VERSIONS)

(0)
Sequential top plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN OR HUBB MODELS The plate is separated into two halves that facilitates rapid change.
€11.00
More
In stock
LongKnob Quick view

Reference: LARGOalu

Long knob aluminum

(0)
Long knob (Sequential-type) machined from aluminum and anodized black. Metallic feel, without the silicone sleeve of the knobs included with the shifter. Compatible with the threaded adapter included with NEWT, NEWT2, THORN, and HUBB shifters.
€13.00
More
In stock
ShortKnob Quick view

Reference: CORTOalu

Small knob aluminum

(0)
Small knob (H-type) machined from aluminum and anodized black. Metallic feel, without the silicone sleeve of the knobs included with the shifter. Compatible with the threaded adapter included with NEWT, NEWT2, THORN, and HUBB shifters.
€11.00
More
In stock
SHH SHIFTER HUBB Quick view

Reference: BLH-6R-BOT

SHH SHIFTER HUBB

(19)
NEW SHH Shifter HUBB. FULL METAL internal mechanism with bearings. Seventh evolution of the SHH Shifter. Now fully modular, designed to be compatible with future versions.
€129.00
More
In stock
BOTTOM Mount NEWT2 Quick view

Reference: BOT-OLD-BL

BOTTOM Mount NEWT2

(0)
ONLY COMPATIBLE WITH NEWT2, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...
€12.00
More
In stock
"Old Fanatec" Mount Quick view

Reference: FAN BL

"Old Fanatec" Mount

(0)
Mount for old Fanatec steering wheels or cockpits ready for old Fanatec shifters with 13 mm bars. Compatible with the old Fanatec "CSR Elite Wheel" and "Porsche 911 Wheel" or the "CSR / Porsche Wheel Shifter Set Adapter". NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA
€10.00
More
In stock
L shaped Plate Quick view

Reference: Lplate

L shaped Plate

(0)
L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....
€3.00
More
In stock
STANDARD COCKPITS Mount Quick view

Reference: POL BL

STANDARD COCKPITS Mount

(0)
Mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrustmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm. NOTE: This mount does not include any kind of clamp, it requires holes in your cockpit's shifter base.  DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...
€10.00
More
In stock
Table Mount Quick view

Reference: TAB BL

Table Mount

(0)
Mount for tables between 0 to 55mm (2.2in). DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA
€13.00
More
In stock
SIDE mount Quick view

Reference: LAT BL

SIDE mount

(0)
This piece allows any other mount to be screwed laterally at 90º (left or right) or directly on a profiled tube with 2 slots for M8 screws. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS. DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA
€14.00
More
In stock
Back to top

Follow us on Facebook

Facebook