Beginning

Reference: TAB bl

Table Extra Mount

Mount for tables between 0 to 55mm (2.2in). DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

Reference: customlogo

CUSTOM LOGO

Custom logo NOTE: MANY OF THE IMAGES WITH CUSTOM LOGOS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF LOGOS REQUESTED BY CUSTOMERS PREVIOUSLY

Reference: customtext

CUSTOM TEXT

Custom text NOTE: MANY OF THE IMAGES WITH CUSTOM TEXTS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF REQUESTED CUSTOM TEXTS BY CUSTOMERS PREVIOUSLY

Reference: Lplate

L shaped Plate

L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....

Reference: CB6

6R PLATE (OLD VERSIONS)

6 + R Plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL

Reference: SQ CB

SEQUENTIAL PLATE (OLD VERSIONS)

Sequential top plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL Sequential plate colored with adhesive vinyl, except RAW plate, which should be decorated. The plate is separated into two halves that facilitates rapid change. ATTENTION: YOU DO NOT NEED THIS PLATE TO HAVE THE SEQUENTIAL MODE OF THE SHIFTER, IT IS...

Reference: CB7

7R PLATE (OLD VERSIONS)

7 + R Plate for NEWT2-NEWT-HAWK-7R models THIS TOP PLATE IS NOT COMPATIBLE WITH THE THORN MODEL

Reference: FAN bl

"Old Fanatec" Extra Mount

Mount for old Fanatec steering wheels or cockpits ready for old Fanatec shifters with 13 mm bars. Compatible with the old Fanatec "CSR Elite Wheel" and "Porsche 911 Wheel" or the "CSR / Porsche Wheel Shifter Set Adapter". NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA

More customizations

Reference: POL BL

STANDARD COCKPITS EXTRA MOUNT

Mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrustmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm. NOTE: This mount does not include any kind of clamp, it requires holes in your cockpit's shifter base.  DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...

Reference: KNOBS+ADAPTER

Threaded KNOBS set

Threaded knobs for older versions of SHH SHIFTER (NEWT2, NEWT, HAWK, 7R and 7R MAX) Includes the long "sequential" type knob, the short "H gearbox" type knob. You can also include the thread adapter (converts the 8mm rod into an M18x1.5 thread) or purchase only this adapter if you are going to use your commercial knob. NOTE: IF YOU PURCHASE A THORN...

Reference: BLT-6R-POL

SHH SHIFTER THORN

THORN is the new SHH Shifter. Sixth evolution and fully renovated. A completely new shifter in the mechanical part (no need for sequential plate anymore!), shorter travel in SEQ mode, new electronics and new types of H plates available. 1) Choose the color of the shifter 2) The mount you need (help here) 3) Type of the top plate