COG-SHH-3DOF MOTION SYSTEM
COG-SHH-3DOF MOTION SYSTEM
SECURE PAYMENT
|
These mounts are extra, all shifters come complete. In this section you can buy a second mounting option for your shifter. |
There are 7 products.
Reference: Lplate
L shaped Plate. This plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures. It can also be used for cockpits with grooved profile. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible....
Reference: FAN bl
Mount for old Fanatec steering wheels or cockpits ready for old Fanatec shifters with 13 mm bars. Compatible with the old Fanatec "CSR Elite Wheel" and "Porsche 911 Wheel" or the "CSR / Porsche Wheel Shifter Set Adapter". NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS MOUNT IS EXTRA
Reference: POL BL
Mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrustmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm. NOTE: This mount does not include any kind of clamp, it requires holes in your cockpit's shifter base. DO YOU HAVE DOUBTS? NOTE: SHIFTERS COME WITH THE MOUNT YOU HAVE CHOSEN, THIS...
Reference: LAT BL
This piece allows any other mount to be screwed laterally at 90º (left or right) or directly on a profiled tube with 2 slots for M8 screws. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS.
Reference: BOT-OLD-BL
ONLY COMPATIBLE WITH NEWT2, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...
Reference: BOT BL
ONLY COMPATIBLE WITH THORN, NOT COMPATIBLE WITH ANY OTHER VERSION. Mount ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not...
