Description

WHAT'S NEW?

-Shorter movement in SEQ mode, more realistic.
-No need for a SEQ plate because the stick is locked to both sides in SEQ mode
-Now you can adjust the strength/feel of the both modes separately
-Real fiber carbon plates
-5R, 6R, 7R plates available and a 7R "type 2" plate with the 7th and R gears in different sides
-You can put the plate in any position, so you can have the R gear in any of the 4 possible positions in 6R and 7R type2 plates (up/left, down/left, up/right and down/right)
-Stainless steel shaft
-You can plug the USB cable in the left (very interesting for the left hand driving users)

The PC shifter (PC only) has H / SEQ modes and includes the chosen mount.

The shifter includes:

-Selected mount option SUGGESTIONS

-Top plate "7 + R" (2 types), "6 + R" or "5 + R"

-Threaded long knob "Sequential" type

-Threaded short knob "H-pattern" type

-Adapter for commercial knobs*

-USB cable lenght 180 cm. It can be replaced by any type B USB cable on the market up to 5m.

-2mm - 2.5mm - 3mm Allen keys for various configuration and/or mounting changes.

You can customize the shifter with many options here.

* Valid for knobs with thread M18x1.5

You must select the necessary mounting option according to your needs. These are the options:

STANDARD COCKPITS: mount for cockpits that include holes for "Logitech G25 / G27 / G29" or "Thrusmaster TH8A and TH8RS" shifters. This mount allows the shifter to be raised or lowered by 50mm.

TABLE: mount for tables or similar without holes. Maximum thickness 55mm (2.2in). This mount CANNOT be used on thicker tables. This mount allows the shifter to be raised or lowered by 25mm.

BOTTOM MOUNT: Ready for a bottom mounting. It has four M6 threaded holes in the same position as the "Fanatec SQ V1.5" shifter (M6x20 screws included) and also has two holes for M8 bolts front and behind for mounting the shifter into custom cockpits or profiled aluminum cockpits (screws not included). This mount is bolted to the shifter and only the THORN version is compatible.

SIDE MOUNT: ready for a lateral mounting, both in a cockpit with a profiled tube, and in a cockpit made by hand. IT CAN ONLY BE SCREWED INTO PROFILED TUBES WITH TWO SLOTS. It also allows you to add one of our mounts at 90º (second mount not included). If you have any doubt ask us here.

L PLATE / CUSTOM COCKPITS: this plate has several holes for many different attachments (very useful in home made cockpits). Check here holes measures.  It can also be used for cockpits with profiled tube. The mount does not include bolts for the cockpit. Not suitable for cockpits with bases prepared for commercial shifters because the holes will not be compatible. This mount allows the shifter to be raised or lowered +/- 50mm but it does not allow lateral mounting. Consult doubts.

"FANATEC OLD": Ready for some older Fanatec steering wheels, with two 13mm bars (not included).

LOOK AT THIS IF YOU NEED ONLY THE SHIFTER'S BODY

Details
BLT-6R-TAB
Reviews
Grade 

Awesome shifter

The shifter took one month to arrive but was worth the wait. Very sturdy, good feeling when changing gear and the sequential mode is fantastic. Recommend

Grade 

10/10

Good price/quality and amazing customer service, the best i've seen from any company.
Buy this mf

Grade 

very happy

works perfectly, went way beyond my expectations

Grade 

best shifter for the price. wow

this shifter is better than what I was expecting. would recommend this anybody!!!

Grade 

Good support and quality!

I had a problem with the USB, without problems they send me a new chip, so service 10+ and support 10+! I am happy with the build quality, it shows the dedication of the manufacture!

Grade 

Good customer service

Had an issue with my shifter, quickly resolved within 1 week free of charge. Quick and detailed messages, making my life easy. The shifter itself is solid and the best shifter I've used when comparing to the TH8A and G27 shifter.

Grade 

Excelente producto

El tacto del cambio es espectacular y la calidad es impresionante, después de muchas horas de uso te das cuenta de que está hecho para durar. La calidad de impresión de la carcasa es excelente, no se marcan las líneas típicas de la impresión en 3D, se nota mucho que cuidan el proceso de fabricación. Sin pensarlo dos veces, recomendaría comprar este producto antes que el equivalente a otras marcas comerciales.

Grade 

Lovely shifter

Arrived 2 days early. And the shifter is amazing quality for the price. And looks and feeling are fantastic! I can see why you are busy!

Grade 

SO TACTILE... LOVE IT

went to this from a logitech G29/g920 shifter its day and night diffrence in feel! 5 stars!

Grade 

a good choice

nice realistic shifter the gear lock feeling is perfect. Immersion is raised up, I am very satisfied .
plate 7+R gives some imprecision into 5/7 gear selection , but really few car into 7 gears manual stick, so 6+R seems best choice. a shorter stick could also be an option ?

Grade 

Amazing

Incredible quality for the price.

Grade 

SHH Shifter

Arrived a day early. The shifter is pure quality for the price. Beautifully made! I can see why you are so busy! Epic product!

Grade 

Black Newt with TM Mount Review.

I love almost everything about the Newt. It just works. It feels great in both H shift and SEQ mode. The two included knobs feel very nice in the hand. It comes ready to give a great experience. The mount fits it really snug to my frame, and it does not move much at all, I am almost 100% surethe slight flex I get during hard shifts is from my frame, not the Newt. The only downside is the USB cable exist the shifter via the right hand side, and the USB cable has a rather long header. If I mount the Shifter on the left hand side like I am used too, the cable fouls on the leg and I am concerned it might damage the USB header on the PCB board with hours of use. So I mounted the Shifter on the right, and now I drive that way. I think a good fix would be to exit the USB from the back or front of the unit. You could alternately build up the case material thicker around the cable exit so if it is close to the drivers leg, it does not press on the cable end. I purchased a 90degree USB cable but the case does not allow installation of this plug and I dont want to modify it. Otherwise, it is perfect and the cost is amazing. I recommend this for someone who wants an upgrade from some of the entry level sim gear (G920 shifter in my case) but does not have a lot of money and still wants a great experience. My only regret is not purchasing the Sequential plate when I purchased the 7r plate. 9.5/10 (if cable let me mount it on the left, easy 10/10)

Grade 

Lovely shifter, even better customer service!

Got the shifter back in 2019. Now, 2,5 years later (and out of warranty) I asked for help on greasing the shifter a bit (works great, was just squeaking a bit) and about a spring replacement (just cause I feel it got a tiny bit worn after all this use, nothing major tbh). Support answered in 10 minutes on a SUNDAY AFTERNOON (Europe) and we traded some emails. Problem was fixed and they will add 2 springs for me on the order I am about to make for a friend. Lovely team and the shifter a lot better than the TH8A I tried back in the day.

Write your review

THORN

THORN

THORN

THORN is the new SHH Shifter. Sixth evolution and fully renovated. A completely new shifter in the mechanical part (no need for sequential plate anymore!), shorter travel in SEQ mode, new electronics and new types of H plates available.

1) Choose the color of the shifter

2) The mount you need (help here)

3) Type of the top plate

Write your review

THORN

BLT-6R-TAB

THORN

THORN is the new SHH Shifter. Sixth evolution and fully renovated. A completely new shifter in the mechanical part (no need for sequential plate anymore!), shorter travel in SEQ mode, new electronics and new types of H plates available.

1) Choose the color of the shifter

2) The mount you need (help here)

3) Type of the top plate

Color
Mount SUGGESTIONS
Top Plate
€109.00
Quantity

100% secure payments

The estimated shipping day for shifters is 20 MARCH

  WARRANTY

SHH SIMULATION PRODUCTS HAVE A 2 YEAR FULL WARRANTY

You might also like

Reference: customlogo

CUSTOM LOGO

Review(s): 0

Custom logo NOTE: MANY OF THE IMAGES WITH CUSTOM LOGOS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF LOGOS REQUESTED BY CUSTOMERS PREVIOUSLY

Price €10.00
More
24abr

Reference: customtext

CUSTOM TEXT

Review(s): 0

Custom text NOTE: MANY OF THE IMAGES WITH CUSTOM TEXTS CORRESPOND TO PREVIOUS TO THE THORN MODEL, THEY ARE JUST AN EXAMPLE OF REQUESTED CUSTOM TEXTS BY CUSTOMERS PREVIOUSLY

Price €6.00
More
24abr

Reference: 6R-THR

6R PLATE - THORN

Review(s): 0

6 + R Plate made of carbon fiber and CNC machined. This top plate can be mounted in any position, allowing for different gear pattern configurations. THIS TOP PLATE IS NOT COMPATIBLE WITH NEWT2, NEWT, HAWK or 7R MODELS

Price €11.00
More
24abr

Reference: 5R-THR

5R PLATE - THORN

Review(s): 0

5 + R Plate made of carbon fiber and CNC machined. THIS TOP PLATE IS NOT COMPATIBLE WITH NEWT2, NEWT, HAWK or 7R MODELS

Price €11.00
More
24abr

Reference: 7R-THR

7R PLATE - THORN

Review(s): 0

7 + R Plate made of carbon fiber and CNC machined. This top plate can be mounted in any position, allowing for different gear pattern configurations. THIS TOP PLATE IS NOT COMPATIBLE WITH NEWT2, NEWT, HAWK or 7R MODELS

Price €11.00
More
24abr

Reference: 7RB-THR

7R PLATE type2 - THORN

Review(s): 0

7 + R Plate made of carbon fiber and CNC machined with a different R gear position. This top plate can be mounted in any position, allowing for different gear pattern configurations. THIS TOP PLATE IS NOT COMPATIBLE WITH NEWT2, NEWT, HAWK or 7R MODELS

Price €11.00
More
24abr

Follow us on Facebook